High Speed Door Safety Photocell
Lanxi Jiaoying Trading Co.,Ltd
High Speed Door Safety Photocell
Tech Information:
1.ensing type: Retroreflective (Standard type)
2.Sensing distance: 0.1 to 5m
3.Sensing target: Opaque materials of Min. ø60mm
4.Response time : Max. 20ms
5.Power consumption: Max. 4VA
6.Light source: Infrared LED(850nm)
7.Sensitivity adjustment: Adjustment VR
8.Operation mode: Selectable Light ON or Dark ON by VR
9.Control output: Relay contact output
10.Relay contact capacity: 30VDC 3A of resistive load, 250VAC 3A resistive load
11.Relay contact composition: 1c
12.Relay lifetime: Mechanically: Min. 50,000,000 operation, Electrically: Min. 100,000 operation
13.Light receiving element: Photo IC
14.Indicator: Operation indicator: red, Stability indicator: green(The red lamp on Emitter of transmitted beam type is for power indication)
15.Insulation resistance: Min. 20MΩ(at 500VDC megger)
16.Insulation type: Double or strong insulation (Dielectric voltage between the measured input and the power: 1kV)
17.Noise resistance: ±1,000V the square wave noise(pulse width : 1) by the noise simulator
18.Dielectric strength: 1000VAC 50/60Hz for 1 minute
19.Protection:IP50(IEC standard)
20.Material: Case, Case cover: Heat resistant ABS
21.Sensing part: PC(with polarizing filter: PMMA) :Unit weight
22.Approx. 208g
23.Individual:Reflector(MS-2)
24.Common:VR adjustment driver, Mounting bracket, Bolts/nuts
If you are interest in our items, please feel free to contact us: